Industrial Lighting: Revolutionizing Industry By Industry

Industrial LED lighting is a decent energy-saving alternative to traditional incandescent lighting fixtures or discharge lamps. Industrial LED lighting boasts high light outputs with much lower power consumption, stability in almost any operating conditions and ability to easily withstand voltage fluctuations. When using LED lamp for industrial lighting you not only save on electricity, but also on the number of light points, cables and power machines. Industrial LED lighting fixtures do not contain mercury and do not require expensive disposal.

Industrial benefits

Why do commercial organizations make their choice in favor of LEDs technology? According to Metcraft Lighting manufacturers, a UK-based manufacturer concentrating its efforts on led street lights production, there is a good bunch of reasons for a business to join the LED race.

Thus, the maximum protection against dust and moisture and physical impact resistance are among the most vital industrial aspects. The degree of protection for industrial lighting fixtures is estimated at IP 65; they can be installed in areas with humidity above 98%, as well as in areas with high dust and extreme temperatures.

Resistance to voltage drops in the network is another dignity: the lamps are equipped with high-quality drivers, so that LED lighting industry operates stably in the range from 160 to 285 V.

The lenses allow to adjust the angle of the beam; thanks to them increases the possibility of using LED lamps in industrial lighting, for example, you can hang them to great heights, highlight any particular object, etc.

Almost complete absence of pulsation is the quality valued by a huge range of industry experts – the coefficient is estimated at less than 1% in LED lamps. For comparison, in analogs, ripple discharge lamps, this mark is ranging from 25 to 40%. Industrial LED lighting requires much less energy than discharge or incandescent lamps. It also uses a smaller cable cross-sections and less powerful machines.

The absence of stroboscopic effect – the illusion of a stationary object (such as circular saws or rotating shafts), is one of the most common causes of accidents at work. The use of industrial LED lighting makes the production process safer.

Luminous efficiency is widely used in industrial lighting fixtures with lamps DRL is 30-60 lm / W LED – 120 lm / W, and it is taking into account losses on dissipation. Industrial LED lighting saves up to 70% and pays for itself within an average period of 6 months.

Why go LED? One can take advantage of soft lighting and the absence of glare effect: due to secondary optics light fixtures for industrial lighting is more evenly distributed and better perceived by the human eye. As a result, workers are less tired and work more productively.

Lifecycle and lumen maintenance are the other two factors that make LEDs stand out from the crowd: LED industrial lighting not only serve over 75 000 hours, but retain the brightness. For example, the light output of lamps with DRL falls 1.5 times after a year of operation, and the glow gets an unpleasant greenish tint.

Unlike analogues with gas discharge lamps, industrial LED lighting fixtures emit virtually no heat. They are absolutely fireproof and can be installed in shops with flammable and explosive objects. Corrosion resistant anodized coating protects the lamps from chemicals and moisture.